Chimaera transport for Renegade Militia Rogue Psyker coven - 3D sketch

Last week I posted about my Rogue Psyker coven for my planned renegade Imperial Guard army.  I mentioned I had a plan for a dedicated transport for this unit, and I have now physically sketched this out in plastic and Blu Tak...

This whole model is based around the GW Imperial Guard Chimaera chassis, and the recently released GW Spirit Host kit for Warhammer fantasy. When I first dreamt this up the other week, I knew I had to try and build it. I also feel like I have actually had an original idea for the first time in ages - although if anybody wants to set me straight on this, I'm receptive! I know I've certainly not seen anybody come up with this yet.


At this point I probably ought to discuss my reasoning for putting this together the way in which I did. As I mentioned in the previous blog post, I intended this group of psykers to be quite shamanistic and primitive in appearance, so it seemed reasonable to me that based on  superstitions around witchcraft still prevalent in the real world, there is a real feel fear around people interfering with the dead and communing with the spirits of the dead (amongst other things). This is what prompted me to look at the new Spirit Host kit in the first place.  The main idea being that I'd build the models and just deploy them with the psyker unit for decorative purposes.

Looking then at the Wyrdvan Psyker entry in Astra Militarum codex, I saw that they were able to take a Chimaera as a dedicated transport. However, when I started thinking about the Chimaera kit, there were certain things that didn't seem to sit too well with me - primarily the las rifles that poke out of the transport compartment area. It just didn't seem right that a bunch of shaman would be firing boom-sticks from a tank.  It was at this point that I started wondering what I could do to remedy this, as it occurred to me that once the las rifles were removed, there would be 6 sizeable, empty holes in the top of the tank.  Looking again at the Spirit Host kit, it was clear to see that these models were quite spindly and ethereal looking, particularly if they were modelled separately rather than in a 'swarm' and that they ought to fit very easily into the aforementioned holes.

So I put the pieces together, and this is what I initially came up with...

I used a couple of these spare pieces you get in various Guard
tanks to cover over the las gun holes from below

Ordo Malleus Inquisitor 3D sketch for INQ28

This is a 3D sketch for an Ordo Malleus Inquisitor by the name of Ziegfried Daubenton.  The parts come from the Tzeentch sorcerer, the Tempestus Scions and the vampire lord from the Zombie Dragon/Terrorgeist kit. The tabard with purity seals I'm not sure of the origin. Possibly Black Templars? Anyway, from the bits box.

Bearing in mind this is held together with blu tack, this explains why he appears to be leaning backwards in one of the pics.  I expect his accessories may change somewhat before the finished product is ready.

Death Guard 3D sketch

Here's a 3d sketch of a marine for my Death Guard army. It's not glued together or owt. It's held in place with blue tac and sheer will power.

I've used a pair of 'Medieval' Steam Lord legs from Anvil Industries, a 'Biohazard' head and back pack from MaxminiEU, the power axe from the GW Huron Blackheart miniature and some standard GW marine and chaos marine parts.

Death Guard out on Manoeuvres

Just a bit of fun on the kitchen table.

I occasionally like to see what stuff might look like on the tabletop. Yes I am that lame.